Garage Door Openers and Parts

Remotes, Keyless Entry and Repair Parts

1st Garage Door Openers, Inc.
 BBB Business Review

For Sales Call 1-480-247-2094

Home
Contact Us
Remotes
Receivers
Keyless Entry and Wall Controls
Repair Parts
Universal
Tec Key Remotes
Wayne Dalton Remotes & Keypads
Lubricant
Multi-Code  300 MHZ and International Freq. 40.685 MHz Frequency

Driveway Alert

Garage Accessories
Shipping/Returns
Warranty Information
Cancellation Policy
About Us
Customer Assistance
Coding Instr.
Fax or check Order form
Site Index
5012 Digi-Code Garage Door Opener Remote Control Transmitter
Remotes
DC5202 Stanley Garage Door Opener Compatible Wireless Keyless Entry
Keyless Entry
Stanley Garage Door Opener Infrared Safety System
Repair Parts

All orders are shipped same or next day!!!

VISA, Mastercard, American Express and Discover

Multi Code 4140 Four Button Garage Door Opener Remote Control Programming

MULTI-CODE

Model 4140 Four Channel Transmitter

Congratulations! You have just purchased a MULTI-CODE Digital transmitter, which we believe to be the finest product of its kind on the market. With little care this transmitter should provide you with many years of excellent service. Please take a moment to read the following instructions and you will find that setting your new transmitter will be quite an easy matter.

ACCESSING THE CODE SWITCH

On the model 4140 the entire front lower half of the transmitter is removable by inserting a small coin in the slot provided with a twisting motion. Once opened you will have access to both code switches and the battery compartment.

CODING

Before placing your transmitter into service, we urge you to set your codes, in order not to interfere with neighboring systems, and to provide security for your own system. You will note that the model 4140 transmitter has two code switches. We strongly urge that several coding schemes be avoided: ALL ON; ALL OFF; 2,4,6,8,10, ON; 1,3,5,7,9,ON. These positions are similar to our or other manufacturer’s test positions, or are frequently used.

TO SET YOUR TRANSMITTER AND RECEIVERS:

Receiver 1 – Set the receiver code switch positions 1-8 to match transmitter side A code switch positions 1-8. Set the 9th position on the receiver and the transmitter to the on (closed) position. Set the 10th position on the receiver and the transmitter to the off (open) position

Receiver 2 – As you did in the procedure for Receiver 1, Set your receiver code switch positions 1-9 to match transmitter side A code switch positions 1-9. Set 10th position on the receiver to the on (closed) position (Note: The 10th position switch on the transmitter side A has previously been set to the off (open) position in the above step).

Receiver 3 -  Set the receiver code switch positions 1-8 to match transmitter side B code switch positions 1-8. Set the 9th & 10th positions on the receiver and the transmitter side to B to the off (open ) position.

RECEIVER 4 -  As you did in the procedure for Receiver 3, set your receiver code switch positions 1-9 to match transmitter side B code switch 1-9. Set the 10th position on the receiver to the on (closed) position (Note: the 10th position switch on the transmitter side B has previously been set to the off (open) position in the above step).

If you are using Two-Multi-Code 3021 or 3028 two channel receivers:

Receiver channel 1 – Set the receiver code switch Positions 1-8 to match transmitter side A code switch positions 1-8. Set the 9th position on the receiver and transmitter side A to the on (closed) position. Set the 10th position on the transmitter side A to the off (open) position. Pushbutton 1 on your transmitter will now match Channel 1 on your #1 two channel receiver (see figure 2 for side A and B transmitter code switch locations).

Receiver Channel 2 – Your receiver and transmitter side A code switch positions have previously been set in the above step. Pushbutton 2 on your transmitter will match Channel 2 on your #1 two channel receiver.

Receiver Channel 3 -  Set the receiver code switch positions 1-8 to match transmitter side B code switch positions 1-8. Set the 9th position on the receiver and transmitter side B to the off (open) position. Set the 10th position on the transmitter side B to the off (open) position. Pushbutton 3 on your transmitter will now match Channel 1 on your #2 two channel receiver.

Receiver Channel 4 – Your receiver and transmitter side B code switch positions have previously been set  in the above step. Pushbutton 4 on your transmitter will match Channel 2 on your #2 two channel receiver.

Once your codes have been set. Check the operation and replace the lower cover.

TRANSMITTER INSTALLATION

The transmitter is completely self contained, including battery, and can be opened while mounted in the car. It is supplied with a clip for attaching to the sun visor, if desired. If the clip is used, attach to the case by sliding it into the recess provided on the back of the transmitter until the small dimples fir into the holes in the clip.

 WARRANTY

ALL MULTI-CODE door related products carry a eighteen (18) month warranty against defects in workmanship or material. This warranty begins at the date of manufacture, for eighteen months. Linear Corporation warrantees our product only to authorized dealers and distributors and not to the end customer. If  you have any questions about our warranty, please ask your dealer to determine the nature and scope of his warranty. Linear Corporation  does not assume, and is not responsible for, any real consequential damages from claims against the performance of our product, nor is it liable for any costs related to loss of life, property, or revenue. Further, Linear Corporation is in no way responsible for installation of our product, and will assume no costs related to reinstallation or removal. Linear Corporation’s warranty is in lieu of all other warrantees, expressed or implied.

PLEASE NOTE

Linear Corporation has devoted a great deal of time and research in order to provide the most reliable equipment possible. Certain limitations must be observed.

  1. MULTI-CODE radio components must conform with FCC Part 15 requirements. For this reason. the range and power of our radios is within specified limits.
  2. As with all manufacturers, Linear Corporation’s radios must accept all signals that they receive. This may, in rare instances, create difficulty.
  3. You should test your entire system occasionally in order to be sure that all components are working in good order.
  4. Linear Corporation’s dealers can provide you with information regarding the use of our radio controls, and can provide valuable installation and operation information, when requested.

Caution: Any changes or modification in intentional or unintentional radiators which are not expressly approved by Linear Corporation could void the user’s authority to operate this equipment. This applies to intentional and unintentional radiators certified per part 15 of the F.C.C. rules and regulations

 

garageopenerparts - Owned by 1st Garage Door Openers, Inc., an independent family owned and operated business serving the Garage Door and Garage Door Opener Industry since 1981.  Providing excellent customer service and assistance for over 25 years. We are a discount reseller of  garage door opener remotes, repair parts, keyless entry and gate operator controls for your home, business, or gated community.   We carry parts for the following garage door openers Lift-Master, Chamberlain, Sears Craftsman, Access Master, Sears Best Craftsman, Sears Automatic Door Opener, Master Mechanic, Security +, Formula 1, Garage Master, Billion Code, LiftMaster Professional, Estate Series, Premium Series, Contractor Series, Power Driver, Whisper Drive, Genie, Alliance, Norelco, Blue-Max, Lift-A-Door, Pro Max, Hercules, Stealth, Excelerator, Intellicode, Genie Pro, OverDrive, Python 2, Signature, Phantom, Legacy, Medallion, CodeDodger, Overhead Door, Genie Shop Vac, Stanley, Vemco, Quiet Glide, SecureCode, Lightmaker, Innovative Products, Whistler, U-Install, Popular Mechanics, Allister, Allstar, Pulsar, MVP, Challenger, GTO, All-O-Matic, Electrolift, Westinghouse, AM/11, Linear, Access Pro, Moore-O-Matic, MegaCode, Delta 3, MultiCode, Heddolf, ESP Micom, Intercontinental Dynamics, Crusader, Wayne Dalton, iDrive, Door Master, Quantum, Classic Drive, Tec Key, Martec, Monarch, Telectron and other garage door openers, and gate operators. Brand names of Garage Door openers are registered trade names of the respective entities and are only used for reference.

Home | RemotesKeyless | Receivers | Repair Parts | Compatibility Chart | Lubricants | Multi-Code 300 MHZ Frequency | Coding Instructions | "Bridged Wire" Instructions | About Us Customer Assistance |  Contact Us | Fax or check | Shipping / Return Policy, Warranty / Cancellation Policy | Tec Key |
1st Garage Door Openers Inc.

Mesa. AZ 85203

1-480-247-2094
1-480-247-3498  Fax
Technical Support  Contact Us

 


Copyright © 2017  garageopenerparts.com.  No part of this site can be reproduced in any form or by any means, photocopying, electronic, mechanical, or otherwise, without the prior written permission of 1st Garage Door Openers Inc.